RDL-3000
FAMILY
USER MANUAL
70-00158-03-00
Proprietary Redline Communications © 2015
Page
53
of 254
April 17, 2015
3.4.4
Subscriber Link Status
To view this page on the sector controller click
Links Summary
to view all wireless links
and click on the Link status symbol (e.g., or ) to view data for a specific subscriber.
On the subscriber, click
in the main menu.
Fig. 26: Web - Subscriber Link Status Screen
General
Subscriber Link Name
: Operator assigned name for this unit.
Subscriber Link ID
: A unique identifier (4 to 127) automatically assigned to identify
each subscriber Link (required when using the CLI interface to modify Link settings).
Subscriber IP
: (SC only) IP address of this subscriber.
Subscriber MAC
: MAC address of this subscriber.
Active
: Indicates the status of the wireless link.
No
: Wireless link is not active (e.g., the remote end unit may be powered off).
Yes
: subscriber has registered and the wireless link is active. Refer to the Data Link
Condition field on this screen to determine if data can be exchanged across the
wireless interface.
Link Up Time
: Time elapsed since the wireless link has been established. This value is
zeroed each time the link becomes inactive.
Link Lost Count
: Number of times this link has been inactive (out of service) since the
sector controller was last powered-on or reset. This value is zeroed each time the sector
controller is reset.
Status Code
: Coded (hexadecimal) indicator for status of this unit. A code of '0x000'
indicates normal operation. See
Active Subscriber Services
: The number of Services active on this link.
Data Link Condition
: Indicates if data can be transmitted across the wireless link. There
are some conditions where the subscriber can be registered but data can not be
