RDL-3000
FAMILY
USER MANUAL
70-00158-03-00
Proprietary Redline Communications © 2015
Page
33
of 254
April 17, 2015
2.3.6
VLAN Tagged Management
When the Management VLAN Tagging feature is enabled, the RDL-3000 recognizes
only management commands received in packets with the specified VLAN ID.
Local Management
A Service Group and Services are not required for local access through the Ethernet
port. Ingress packets received on the Ethernet port are checked for a VLAN tag with the
management VID before performing classification, and matching packets are forwarded
directly to the management application.
Managing subscribers over the wireless interface requires creating a management
Service Group and adding a Service for each subscriber. The CIR and priority settings
must provide sufficient bandwidth and priority to perform the required administrative
tasks.
Fig. 10: Functional Desc. - VLAN Tagged Management
Notes:
1.
For initial installation and setup, Redline recommends using 'Pass through' mode for
the management Service Group and member Services. Connectivity issues with
VLAN services may cause the management function to be unreachable and require
a site visit and/or long reset operation to recover control of the unit.
2.
The sector controller can not be managed over the air (security restriction).
