manualshive.com logo in svg

RedKnows SBX-3 Series, User And Installation Manual, Page: 19 / 21

Share
Download
RedKnows SBX-3 Series User And Installation Manual Download Page 19

19

English

Accessories, optional

Motion sensor, Infrared 

Motion sensor, Microwave 

Vibration sensor

Glossary

Explanations for some technical expressions appearing in the manual 

GPS

 - Global Positioning System - A global sattelite system for positioning and navigation

GSM

 - Global System for Mobile communication - Telephon system for mobile phones

LED

 - Light emitting diode - A small, low-current lamp

LAT/LONG

 - Latitude and Longitude - A coordinate system of degrees, minutes and seconds 

covering the entire world. Latidude 0° is the equator, 90°N is the North Pole and 90°S is 
the South Pole. Longitude 0° is the Greenwich Meridian or Prime Meridian. 

GMT

 - Greenwich Mean Time  - GMT is sometimes called Greenwich Meridian Time because 

it is measured from the Greenwich Meridian Line at the Royal Observatory  in Greenwich, 
London, England.  It is the place from where all time zones are measured.

SMS

 - Short Message Service - A text messaging service in the mobile telephone system

Relay

 - An electrically controlled circuit breaker

SIM card

 - A small plastic card with a computer chip used by mobile phones and SBX-3. 

The card contains information such as telehone number and mobile phone operator.

Summary of Contents for SBX-3 Series






















Reviews:

No comments