3
2
Ensure that all connections points are clean, and that all connections
are secure. Check that wiring terminations look neat and that no
loose strands of wires are touching any other terminals.
Your speakers are now ready for operation.
Note
We recommend using heavy gauge speaker cable for the best quality sound
(the heavier, the better and with a 2mm minimum).
When using a typical connection, the upper and lower sets of terminals
must be connected to one another for the speakers to operate properly.
For this purpose, your speakers come supplied with gold bridging pieces
already in place making this connection.
Bi-wire connection
The terminals at the rear of your speakers are colour coded red (+) and
black
(-). Follow the procedure outlined below to bi-wire your speakers. Please
note that bi-wiring requires two sets of loudspeaker cables.
Bi-wire connection procedure
Step
Action
1
Remove the gold bridging pieces conmnecting the upper and lower
sets of input terminals on each speaker.
2
Connect the
left
speaker. For both upper and lower pairs of speaker
terminals, connect the:
??
red (+) terminals to the amplifier’s
left
red (+) terminal; and
??
black (-) terminals to the amplifier’s
left
black (-) terminal.
3
Connect the
right
speaker. For both upper and lower pairs of
speaker terminals, connect the:
??
red (+) terminals to the amplifier’s
right
red (+) terminal; and
??
black (-) terminals to the amplifier’s
right
black (-) terminal.
4
Ensure that all connections points are clean, and that all connections
are secure. Check that wiring terminations look neat and that no
loose strands of wires are touching any other terminals.
Your speakers are now ready for operation.