redgumbrand
.com.au
ASSEMBLY
- FIT REAR GLIDES
Please follow these steps to fit rear glides to frame:
1.
Put the unfolded frame on its side.
2. Offer up leg with glide to REAR LEG of side frame.
Align holes in leg with press button on frame.
3. Slide leg onto frame.
4. Push in press button and continue to slide leg onto frame until press button pops
out of hole in leg. (Refer to page 7 for walking frame height adjustment)
5. Repeat process to fit other leg with glide onto frame.
5.
1. Push in press button
Locate tube with glides onto
REAR leg on frame
2. Slide leg onto frame until press
button pops out of hole in leg.
IMPORTANT NOTE
Press button MUST protrude
3mm out from tube when
properly located in place.
