Connecting your amplifier to other components
For safety reasons, always ensure that your amplifier and other
components are turned off and disconnected from mains power before
making any connections. Failure to do so may result in an electrical
shock and/or damage to your equipment.
Loudspeakers
The loudspeaker terminals at the rear of your amplifier are colour
coded red (+) and black (-).
Follow the steps below to connect your amplifier to your speakers.
Step
Action
1
Connect the:
red (+) amplifier terminals to the respective red
speaker (+) terminals; and
black (-) amplifier terminals to the respective black (-)
speaker terminals.
Make sure when doing this that you connect the left/right speakers to
the left /right channel outputs on the amplifier.
2
Ensure that all connections points are clean, and that all connections
are secure. Check that wiring terminations look neat and that no
loose strands of wires are touching any other terminals. Failure to
make neat connections may result in poor sound, or amplifier
damage.
Note:
We recommend using heavy gauge speaker cable for the best
quality sound (the heavier, the better, and with a 2mm minimum).
Out
Switching
Remote
In
300W (max)
220-240V 50/60Hz
AC
Do Not Open
Speaker
Left
Speaker
+
-
-
+
Right
Ne Pas Ouvrir
Risk of Electric Shock
Risque de Choc Electrique
Australia
Made in
