5
Charging your SL16
1.
Plug the micro-USB end of the included charge cable into the
5V IN port located on the side of the unit.
2.
Plug the other end of the charge cable into a powered
USB port, such as a computer, laptop or USB AC adaptor
(not included).
3.
When fully charged, all 4 LEDs will remain solid green.
Charging your device
1.
After your device is placed on the stand, plug one end of
your device’s original charge cable (not included) into the
2.4A OUT port on the side of the unit.
2.
Plug the other end of the charge cable into your device.
3.
Press and hold the Power button on the side of the unit.
4.
Once charging is complete, remove the cable from your device.
NOTE:
The SL16 will automatically power off after one minute
of inactivity.
FCC information
This equipment has been tested and found to comply with the
limits for a Class B Digital Device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Summary of Contents for SL16
Page 20: ......
