6
Operation
Plug the appliance into an earthed socket.
Use “ON/OFF” switch to start the units.
WARNING!
Never move the appliance during use.
Use the controle panel at the front of the appliance to set the desired
temperature.
Press the SET button to view the chosen temperature in the display. Press SET
again to return to the current temperature.
If you press SET for 3 seconds you will see the chosen temperature blinking.
Press the arrow up or arrow down button to adjust the chosen temperature. Again
press SET to save the set temperature and return to the current temperature.
The button with water drops can be used to start the defrost cycle. Press the
button for 6 seconds, the defrost cycle will be started manually this way Keep in
mind this is a short defrost cycle and freezers still need to be emptied regularly
and shut down to completely defrost all the ice in the machine.
Place the shelfs at the desired height in the cooler, when using a freezer. The
shelfs are not adjustable in height. Cause the cooling systems runs through them.
Wait for 2 hours after switching on the appliance before placing products inside
the appliance.
Place products approximately 5CM from the back and side walls of the appliance,
to prevent freezing of the products and blocking air circulation in the machine.
Do not place any wet boxed/products, or anything of this kind, in the appliance.
NOTIFICATION!
We recommend keeping enough space in between products in
side the appliance to keep a proper air circulation. When not following this
guideline the cooling capacity of the appliance cannot be guaranteed as the
