16
10.0
DETACHING THE VERTI-KNIFE®
A
B
C
1
3
2
5 4
Figure 11
The machine can be detached from the tractor in the following manner:
(Figure 11)
1. Drive the Verti-Knife
®
to a parking area with a firm/flat surface.
2. Put the adjustable front and rear legs in the lowest position (A).
3. Lower the Verti-Knife
®
controlled and calmly until it stands completely on the ground.
!!
Make sure that the tractor is blocked well and cannot move on its own
accord !!
!!
Switch off the tractor before descending !!
!!
Make sure that the Verti-Knife
®
stands firmly on the ground and is
blocked against sliding before descending from the tractor !!
4. Release the top rod (1).
5. Take the locking pin (2) out of the pins (3) and pull the locking pin out of the top rod
connection.
6. Take the locking pins (4) out of the pins (5) and pull the locking pins out of the Verti-
Knife
®
frame so that the bottom lifting arms of the tractor are released.
!! Make sure that the Verti-Knife® is stable !!
7. Start the tractor and drive off.
