background image

 

 

5

 
Only authorised technical personnel may carry out repairs to the Verti-Comb. 
 

Keep a record of the repair activities. 

 

5.  The general applicable health & safety (Dutch: ARBO) regulations must also 

be followed in addition to the instructions in this user manual. 

 

Relevant traffic regulations also apply in case of using public roads. 

 

Transporting persons is not permitted! 

 
Do not use the Verti-Comb in the dark, in heavy rain/storm or on slopes with an angle 
larger than 20 degrees. 
 

6.  All persons that are going to operate the Verti-Comb must be familiar with all 

the functions and control elements of the Verti-Comb 

before

 starting any work 

activities. 

 

Attach the Verti-Comb to the towing vehicle according to the regulations. 

(Danger of injuries!)

 

Check whether you have a clear field of vision – both close by and far away – 

before

 

you depart. 
 
Safety stickers 

(Figure 2, 3 and 4)

 

with an identical meaning are attached to both sides

 

(Figure 5)

 of the Verti-Comb. These safety stickers must always be clearly visible and 

legible and must be replaced if they have become damaged.

 

 
During operation, 

NO persons are allowed within the danger zone

 of the Verti-

Comb, because there is danger of physical injuries caused by flying material 

(Figure 3)

 
 

 

 

 

 Figure 

3

 

 

    Figure 

4

 

 
 

Keep a distance of minimum 4 metres!

 

(Figure 4)

 

 

Summary of Contents for Verti-Comb 1800



















Reviews: