24
14.1 TENSIONING V-BELTS TURF TIDY FROM SERIAL NUMBER
C310212
4
3
5
1
2
A
Fig.13a
See fig. 13a
!! Ensure that that tractor/Turf Tidy is properly blocked and cannot move
independently !!
!! Ensure that the PTO shaft on the Turf Tidy has been disconnected !!
1. Remove all nuts 1 and the safety guard 2.
2. Loosen lock nut 3.
3. Loosen nuts 4 slightly until the tension has just been released.
4. Adjust nut 5 and use this to adjust the tension on the V-belts.
5. Check the V-belt tension by exerting pressure on point A with a tension of 3.5 kg (lbs). The
compression must be 4.5 mm (”). (Per belt)
6. Tighten nuts 4.
7. Tighten lock nut 3.
8. Replace safety guard 2 and replace all nuts 1.
