7
FIRST STARTUP
Starting the engine
a) Fill the gas tank with lead-free gas.
b) Put the throttle in
FAST
-position.
c) Put the engine switch to ON-position and the starter lever to the left.
d) Start the engine, repeat if necessary and close the choke slightly.
e) As soon as the engine runs, push the starter lever back and adjust the
desired engine speed with the throttle.
Note: Please read also engine manufacturer's manual, which is included in this
manual. It is important that the operator be familiar with the rules contained in
this manual.
After the first loaded ride
-
Tighten wheel nuts.
-
Wheel-hub play, check and have adjusted if necessary.
-
Check tire-pressure.
-
Check tension of V-belts and chains.
Summary of Contents for RINK SP950
Page 14: ...14 Replacing the conveyor belt...