CARE and MAINTENANCE
Lubricate bearings with multipurpose grease (after every 50 hours
of operation)
(See page 19, Fig. 7)
(1) Bearings on both sides of the spreading disc
(2) Bearings on both sides of the front and rear shafts of the conveyor belt
(3) Bearings on both sides of the front and rear shafts of the cross conveyor belt
(4) Bearings on both axles
(5) Bearing on the conveyor uptake of the cross conveyor belt
(6) Bearings on both sides of the swivel cylinder of the cross conveyor
(7) Bearings on both sides of the raising and lowering cylinders of the cross conveyor
Bearings without grease nipples are maintenance-free.
