Redexim
9
5. FIRST INSTALLATION
The machine should be prepared for use as follows (
Figure 1
):
1. Attach cables to the hoisting point
(1)
.
Ensure that the crane and hoisting cable can handle at least the following weights:
POWER BOX RAKE 150
650 kg (1430 lbs)
2. Remove the wheels
(2)
from the pallet and mount these at the back of the machine in
the square beams.
3. Lower the front leg
(3)
and secure this with the clip
4. Lift the machine including the
pallet approx. 10 cm (4”) off the ground.
5. Loosen the pallet by removing the 3-point pins
(4)
at the bottom.
6. Pull the pallet from under the machine.
7. Carefully lower the machine until it stands safely on the ground.
!! KEEP A SAFE DISTANCE. THE MACHINE MAY START TO SLIDE DURING HOISTING !!
!! NEVER CRAWL UNDER THE MACHINE !!
Figure 1
