Redexim
16
10.
MAINTENANCE
Time schedule
Check / Grease point
Method
Before
every
use
Check for loose bolts / nuts.
Tighten loose bolts / nuts
with the correct tightening
moment.
Attach the machine to the shovel
and operate the machine for 5
minutes.
Listen and observe any
strange movements /
sounds.
Presence and readability of the
safety stickers (Figure 4)
Replace these if not present
or damaged.
After
every
use
Clean the rotor.
Remove sand and dirt from
the rotor.
Grease points of the wheel
frame
Use EP2 grease
– 1 shot
After the
first
20 working
hours (new or repaired)
Check for loose bolts / nuts.
Tighten loose bolts / nuts
with the correct tightening
moment.
Attach the machine to the shovel
and operate the machine for 5
minutes.
Listen and observe any
strange movements /
sounds.
After
every
50 hours
Check the tension of the drive
chain.
If necessary, tighten the
chain (see Section 12).
Check whether the drive chains
are greased adequately.
Grease the drive chains.
Grease the rotation point of the
frame.
Use EP2 grease
– 1 shot
After
every
100 hours
Top up the lubrication points
with grease.
Use EP2 grease
– 1 shot
Table 1
10.1. Tightening torques
Table: Tightening torques
8.8
10.9
N.m
N.m
M 6x1,0
11,3
16,5
M 8x1,25
27,3
40,1
M10x1,5
54
79
M12x1,75
93
137
M14x2,0
148
218
M16x2,0
230
338
M18x2,5
329
469
M20x2,5
464
661
M22x2,5
634
904
M24x3
798
1136
