Redexim MULTI-SEEDER 1200 User Manual Download Page 3

 

 

!     SAFETY INSTRUCTIONS       !

 

 

 

Figure 1 

 

The design of the Multi-Seeder allows for safe use. Safe use 
is only possible when the user fully understands the safety 
instructions given in this manual.

 

 
Read and understand 

(

Figure 1

) the manual before working 

with the Multi-Seeder. 
 
Not using the machine as described in the manual may lead 
to injury and/or damage to the Multi-Seeder.

 

 

 

INTENDED USE OF THE MACHINE AND USER OBLIGATIONS 

The Multi-Seeder is solely intended for use on lawns and other areas where grass could 
grow. Any other use is considered to be incorrect use. The manufacturer does not accept 
any liability with regard to damage resulting from incorrect use; all resulting risks are the 
responsibility of the user. Correct use also includes following the manufacturer’s 
instructions for use, maintenance and repair. 
 
The Multi-Seeder was constructed according to the latest technological knowledge and is 
safe to use.

 

 

All persons whom the owner assigns to operate, maintain or repair the Multi-Seeder must 
read and completely understand the operating manual and in particular the 

Safety 

Instructions

 

 
Any changes of the Multi-Seeder (including its functioning) that may affect its safety must 
be corrected immediately.

 

 

Every time before using the Multi-Seeder, the user is 

obliged

 to inspect it for 

visible 

damage and defects

 

 
If any 

modifications

 have been made to the Multi-Seeder, the present CE certificate 

becomes null and void and the person who made the modifications should 

himself

 is 

responsible for a new 

CE certificate

 
The user is responsible for a 

safe tractor/Multi-Seeder combination.

 

This unit must be 

tested

 in terms of noise, safety and ease-of-

use. In addition, user’s instructions must be 

prepared.

 

 
Wear suitable clothing. Wear sturdy shoes with a steel tip, wear long trousers, do up long 
hair and wear no loose clothing. 
 
In addition to the instructions in this user manual, the generally applicable regulations with 
respect to safety and working conditions must be observed. 
 
For use on public roads the relevant traffic rules also apply. 
 
Transport of persons is 

not

 permitted!

 

 
 
 

Summary of Contents for MULTI-SEEDER 1200























Reviews: