21
11. TECHNICAL INFORMATION: GREASEPOINTS
In order to guarantee a proper functioning of the Multi-Seeder, the grease points on both
sides of the machine (Figure 11) have to be lubricated periodically. Lubricate the grease
points according to the table in Chapter 10.
Figure 11
11.1. TECHNICAL INFORMATION: DIGITAL SURFACE METER
The machine can be equipped with a digital surface meter that can be used to read various data such
as the machined area, distances, hours of work, etc.
For the explanation of the operation of this surface meter, a manual is included in the toolbox.
If the settings of the surface meter have disappeared from memory, these are the specific
parameters to be filled in:
Machine
Parameter “C”
Pulses of the speed sensor (Chapter 8.2)
Parameter “L”
Working width (Chapter 8.4)
Setting UN=0
Multi-Seeder 1200
79
1.2
Multi-Seeder 1600
79
1.6
Multi-Seeder 2100
79
2.1
