Redexim Combi-Groom User Manual And Parts Book Download Page 3

Redexim

 

 

3

FOREWORD 

 
Congratulations on your Combi-Groom purchase. For safe and long-lasting operation of this machine, 
it is necessary to read and to understand this user manual. It is impossible to work safely with this 
machine without complete knowledge of the content of the user manual. 
 
This machine does not operate independently. It is the user’s responsibility to use the correct tractor or 
other towing vehicle. The user should check the combination of the towing vehicle and the machine 
with regard to various aspects, such as noise level and safety risks. In addition, the user should 
comply with the user instructions of the vehicle and spare parts that are used.  

 

All information and technical specifications provided at the moment that this document is published are 
the most recent ones. Design specifications may be changed without prior notice.  
 
You can contact your sales point or dealer if you have questions and/or if there are ambiguities in this 
manual or about the machine concerned.  
 

WARRANTY CONDITIONS 

 
AT THE TIME OF DELIVERY THIS MACHINE IS GUARANTEED AGAINST MATERIAL DEFECTS. 
THIS WARRANTY IS VALID FOR A PERIOD OF 12 MONTHS FROM THE PURCHASE DATE. 
REDEXIM WARRANTIES ARE SUBJECT TO THE ‘GENERAL CONDITIONS FOR SUPPLY OF 
PLANT AND MACHINERY FOR EXPORT, NUMBER 188’ THAT ARE PUBLISHED UNDER THE 
AUSPICES OF THE UNITED NATIONS ECONOMIC COMMISSION FOR EUROPE. 
 

REGISTRATION CARD 

 
For your own information, fill in the table below: 

 
Serial number of the machine 

 

 
Dealer name 

 

 
Date of purchase 

 

 
Remarks 
 

 

 
 

 

Summary of Contents for Combi-Groom
















Reviews: