6
before storing the power tool. Such
preventive safety measure reduces the
risk of starting the power tool
accidentally.
4. Store idle power tools out of reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate it. Power tools
are dangerous in the hands of untrained
users
.
5. Maintain the power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
7. Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Battery Tool Use And Care
1. Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery
pack may create a risk of fire when used
with another battery pack.
2. Use power tools only with specifically
designated battery packs.
Use of any
other battery packs may create a risk of
injury and fire.
3. When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or fire.
4. Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If you accidentally contact the
battery liquid, flush it with water. If the
battery liquid contacts the eyes, seek
medical help as soon as possible. Liquid
ejected from the battery may cause
irritation or burns.
Service
Have your power tool serviced by a
qualified repair professional using only
the identical replacement parts
.
This
will ensure that the safety of the power
tool is maintained.