10
Switching The Power Tool
Off
1. Release the On /Off switch (see #2
in the illustration above).
GENERAL SAFETY WARNING
#1!
Removing And Emptying
The Grass Catcher
1. If the grass catcher bag is full and
should be emptied immediately.
2. Switch the motor off.
3. Wait until the cutter bar stops.
4. Lift the discharge flap.
5. Remove the grass catcher.
6. Lower the discharge flap down
again.
7. Empty the grass catcher.
8. Before hooking, remove any
obstructions from the cutting area
Working Without the Grass
Catcher
When working without the grass
catcher, the mowed
grass is ejected directly downwards.
Charging The Battery
1. Plug the charger into an AC outlet
100-250V (normal household voltage).
2. Insert the battery into the slots of the
charger and slide
into place until the battery locks into
place
3. The LED will flash green while the
battery is charging.
- Once the battery is fully charged, the
LED indicator will show a steady green
light.
- Remove the battery by pressing and
holding the latch button and sliding out
of the charger.
Lithium Ion batteries
have no memory effect – a partial
charge will not damage your battery.
TIPS ON LAWN CARE
Here are some tips to help you keep your
lawn looking healthy and ensure uniform
growth:
Lawns consist of various grass types.
Frequent mowing promotes the growth of
grass, resulting in strong roots and a firm
sward. If you seldom cut the grass, you
will enhance the development of high-
growing types of grass and other weeds,
such as clover, daisies). The normal
height of a lawn is approx. 4–5 cm. Only
one third of the total height should be
mown; therefore cut 7–8 cm long grass to
normal height.