Redback A 6530 Operating Manual Download Page 20

www.redbackaudio.com.au

Redback® Proudly Made In Australia

20

Redback® 

Programmable Control System

3.10 DUAL LINE LEVEL INPUT SERIAL VOLUME CONTROLLER

This setup utilises a Redback

®

 A 6514 Serial Volume Controller which has been designed to alter the volume of any low 

level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485. The unit includes two RCA inputs which 
are selectable by serial control and remote volume which is also serial controlled.
The Redback

®

 A 6514 will interface directly to the Redback

®

 A 6530 or A 6540 series wallplate or any other third party 

control system which utilises RS232 or RS485 serial codes. 
The figure below illustrates a typical connection diagram when using the Redback

® 

A 6530 or A 6540 series wallplate or a 

third party controller to control the Redback

®

  A 6514 Serial Volume Controller. 

The Redback

® 

A 6530 or A 6540 series wallplate connects via a Cat5e/6 lead into the “To A 6500” RJ45 connection port of 

the Redback

®

  A 6514. 24V DC power is supplied to the Redback

® 

A 6514 via a 24V DC plugpack or other 24V DC source 

(minimum24V DC 1A).
Serial control of the volume circuit is provided by the A 6530 or A 6540 series wallplate which is programmed with the serial 
codes using the PC software supplied with the wallplate. 
The third party controller sends RS232 or RS485 codes directly to the corresponding RS232 or RS485 input connector of the 
Redback

® 

A 6514. 

Either Input 1 or Input 2 can be selected by serial control and the output volume of the Redback® A 6514 can also be set 
by the serial codes. 

For more information refer to the Redback® A 6514 Instructions or the Redback website - www.redbackaudio.com.au

Fig 3.10

Redback® A 6541

Redback® A 6514

24V DC PLUGPACK

(MINIMUM 1A)

(Not Supplied)

(Cat5/6 Cable 50m Maximum)

240V AC @ 50Hz

Line

Mic 

L

R

100V

OUTPUT

+

2

1

3

Amplifier

DVD

REDBACK

RS232

or

RS485

THIRD PARTY

CONTROLLER

RS232/

RS485

DVD Player 1

RS 485

RS232-2

TO A 6500

INPUT 1LEFT

INPUT 1 RIGHT 

LEFT  OUT

RIGHT   OUT

INPUT 2 LEFT

INPUT 2 RIGHT   

DVD

REDBACK

DVD Player 2

Summary of Contents for A 6530

























Reviews: