Mounting the AC Power Tray
4-10
SmartEdge 400 Router Hardware Guide
Figure 4-5 Installing AC Power Tray Brackets for Flush Mount Position
Figure 4-6 Installing AC Power Tray Brackets for Extended Mount Position
Install the AC Power Tray
You mount the AC power tray directly below the chassis. To install the AC power tray in the rack, you need
four 12-24 or equivalent screws. Perform the following steps; see Figure 4-7:
1. Position the AC power tray directly below the SmartEdge 400 chassis so that the screw holes in the AC
power tray mounting brackets are aligned with the screw holes in the rack just below the chassis.
2. Using a Phillips screwdriver, secure the AC power tray to the rack with four 12-24 or equivalent screws;
tighten each screw using 30.0 inch-lbs torque (3.4 Newton-meters) maximum.