6
www.redbacklasers.com.au
ARL516G
TM
OPERATING INSTRUCTIONS
Battery Instructions
To charge the battery pack simply insert the charger plug into the charging
socket. The LED on the charger is illuminated red during the charging
process and will turn green once the battery is fully charged. Only the
special rechargeable pack can be charged and it can be charged either when
inserted or when not inserted into the laser.
When the power LED on the keypad flashes, the rechargeable battery packs
need recharging or standard batteries need replacing. Note the charger will
only charge the supplied rechargeable battery pack.
Handy Hints
•
Prior to initial use, charge the rechargeable batteries for at least 8
hours.
•
Running rechargeable batteries completely flat will increase battery life.
•
The ARL516G™ can operate off mains by plugging the charger (for
indoor use only) into the unit.
•
Remember the ARL516G™ can operate using standard batteries when
rechargeable pack is out of charge.
The ARL516G has two battery options either 4 x standard “C” size Alkaline
or the Ni-Mh rechargeable pack. For standard 4 x “C” alkaline operation
simply insert into standard battery holder in the direction indicated and
tighten the locking screw.
To use the rechargeable
battery pack first remove
standard battery pack if
inserted and replace with
the rechargeable battery
pack and tighten the
locking screw.
Summary of Contents for ARL516G
Page 1: ......
