14
PL650
TM
TROUBLE SHOOTING
•
Keep laser and accessories stored in protective case.
•
Make sure laser is stored dry, dry out before storage to prevent damage.
•
Remove batteries when not used for an extended period of time to prevent
leakage.
•
The PL650
TM
is a precision instrument and should not be subjected to excessive
knocks, drops or vibrations.
•
Self check calibration from time to time. See page 13
•
For service contact Redback Lasers.
www.redbacklasers.com.au
Q.
I have difficulty using the remote control!
A.
When you press a button each tone is equal to one press, so on
a toggle button like the power button if you press and hold and
hear 2 tones then it will have turned it on and then off again.
Q.
The Laser does not power up!
A.
Check the rechargeable batteries are charged and connected
correctly and or replace standard “D” size Alkaline batteries and
check they are inserted correctly and pack fully tightened up into
recess.
Q.
Laser fails to find level, continually flashing!
A.
Check that the laser is on a stable location without vibration,
check batteries and replace if neccessary, check that the left to
right bubble vial is central. If still not working whilst the laser
is turned on tilt the laser vertically upwards (do not look into
beam) hold for 10 seconds then place back onto ground, this will
re-set the sensors without changing calibration.
www.redbacklasers.com.au
Care & Maintenance
Trouble Shooting - FAQ
Summary of Contents for PL650
Page 1: ......
Page 12: ...12 www redbacklasers com au GRADE CONVERSION CHART...
