RedBack Laser PL650, Instruction Manual

Page: 10 / 16

10
PL650
TM
OPERATING INSTRUCTIONS cont.
Using the Feet for Different Diameter Pipes
The PL650
TM
has 5 sets of feet of differeing lengths and each set has a size
printed on them which refers to the diameter size of the pipe you wish to
use the laser inside of. The idea is that with the correct size feet the laser
dot should be central to the pipe. The feet are interchanged by un-screwing
them in anti-clockwise direction. Note that when the legs are removed the
inbuilt threads are suitable for 150mm diameter pipe.
www.redbacklasers.com.au
LCD Display Light
The PL650
TM
has a back light for the LCD display this light activates when
any of the keys are pressed on either the keypad itself or the remote control
unit. To save battery, the light turns itself off after a few seconds of the keys
not being pressed, to turn the light back on simply press any of the keys
once more.
Using the Targets for Different Diameter Pipes
The PL650
TM
comes with a heavy duty target holder that can hold either the
15-300mm target plate or 400-500mm target plate. To change plates or to
adjust the height of the plate simply unlock the locking knob on the right and
slide plate up, the pointer above the knob indicates the diameter.
The Target is designed to fit either inside or on top of the pipe and can be
levelled left to right with the help of the bubble vial.