background image

3

DLD5X

TM 

INTRODUCTION

Congratulations on purchasing the DLD5X™ multi line and dot laser level 

with plumb up/down, horizontal/vertical alignment and 90 degree square.

The DLD5X™ is automatic levelling and features a secure pendulum lock to 

prevent accidental damage when not in use.

The DLD5X™ features clear bright horizontal and vertical lines to produce 

a wall cross as well as clear bright dots providing plumb up and down and 

three at horizontal at 90

o

 to each other.

The DLD5X™ is ideal for all types of indoor installation work whether 

its  electricians  transcribing  points  from  floor  to  ceiling,  air  conditioning 

installers, windows and garage doors.  In fact this dot & Line laser can just 

about do anything indoors.

Other features of the DLD5X™ include a sturdy magnetic base, Tripod 

mounting options, heavy duty construction with rubberised casing and Std 

“AA” Size battery operation.  The DLD5X

TM 

also boasts an industry leading 

Two Year Redback Warranty. (See page 12)

www.redbacklasers.com.au

DLD5X™ Included Accessories

• 

DLD5X™ Laser Unit

• 

Protective Carry Case

• 

Standard “AA” Batteries

• 

Magnetic Base

• 

Attachment Straps

• 

Magnetised Target

• 

Glasses to Assist Viewing of Laser

• 

Instruction Manual

Summary of Contents for dld5x













Reviews: