Prior to extending arm
：
Remove 2 Allen
Allen
Allen
screws at top of
Arm Assembly with included Allen
Remove 2
screws at bottom
of Arm Assembly with included
Allen wrench.
Note- 4
screws will be used in Step 5
to reattach arm assembly to wall mount.
STEP 3 - PRIOR TO EXTENDING ARMS REMOVE ARM ASSEMBLY FROM WALL PLATE
A1
wrench.
P7
!
!
10
10
9
9
Select the proper spacer(s) as below if necessary
OPT
A
OPT
B
OPT
C
STEP 2- USE M8 STEEL WASHER IF THE PHILLIPS SCREWS FROM THE MONITOR KIT
ARE TOO LONG
B or C
4~7
11
11
11
8
8
10
9
1~3
1~3
B or C
B or C
Remove Arm Assembly by gently pulling lower section of Arm Assembly away from Wall Plate which
will allow for top portion of Arm Assembly to be lowered and moved away from Wall Plate.
A1
Diagrams show three possible options for using additional washers if hardware screw are too long to properly
tighten into back of TV.
