SOLAR PANEL MOUNTS
The ABS Plastic Corner, Side and Spoiler Mounts are designed to mount
single or multiple panels to your RV or boat. The ABS Mounts allow for
single or multiple solar panels to be attached to your RV or boat without
drilling, to maintain seal integrity.
ABS PLASTIC MOUNTS RANGE
WARNING
Incorrect mounting can cause the panels to become detached during travel, which
causes a safety risk to road users. Ensure that you follow the manuals instructions for
correct installation.
Solar panels mounted to all types of vehicles, including but not limited to 4×4 Vehicles,
RVs, Caravans, boats, etc. are subject to high wind and vibration forces.
The instructions provided are intended as a guide. Solar panels must be securely
attached to the vehicle in accordance with all local and national safety standards.
In addition, the solar mount manufacturers instructions must adhered to, or even
exceeded, to comply with local and national standards in some circumstances. It is
recommended that the ABS Mounts are installed by a suitably qualified person.
CAUTION
Incorrect installation and mounting of the solar panel will affect
the performance of the solar panel.
Always use appropriate personal protective equipment (PPE)
when operating power tools.
SMI9001
4 × ABS Plastic Corner Mounts
SMI9002
2 × ABS Plastic Side Mounts
designed for mounting multiple
solar panels.
SMI9003
2 × ABS Plastic Spoiler Mounts
to suit SMSP1050
SMI9007
2 × ABS Plastic Mounts, to suit
SMSP1080, SMSP1120 and
SMSP1180.
SMC0001
Designed to route a single cable
into your Caravan or RV.
