12
2 INSTALLATION
2.6
Mounting the remote head on a dash or console panel
Ensure that there is enough space behind the mounting location to fit the Tow-Pro
control head and remote head cable before drilling any holes.
Ensure the remote head push-button activates correctly when installed into
surfaces with a thickness greater than 1/8” (3.2mm). Failure to activate
correctly would result in not being able to activate the override function or
change modes.
2
Apply adhesive bezel (optional)
to cleaned surface
Gently bend bezel
to aid removal of
white backing tape
4
Turn shaft fully anti-clockwise
3
Insert Remote Head shaft through
the hole and fasten with nut
Torque to 0.6 ft-lb (0.8Nm)
1
Drill 25/64" (10mm) mounting hole
25/64"
(10mm)
(drill pilot
hole first)
1/16"- 9/64"
(1.25-3.6mm)
6
Test installed remote head
for correct function
5
Apply knob with ‘0’ aligned
to level marker on the bezel
Level marker
Summary of Contents for EBRH-ACCV3-NA
Page 26: ...25 9 NOTES ...
