Redarc EBRH-ACCV3-NA, Manual, Page: 12 / 28

11
2 INSTALLATION
2.3 Mounting the Remote Head
The Tow-Pro
®
Elite remote head is designed to be mounted at a distance from the
main unit, allowing for a neat, convenient installation and not impeding on lower
leg airbags or driver leg room. The Tow-Pro
®
Elite remote head is designed to be
mounted on or around the vehicle dashboard and when installed correctly, complies
with Australian Design Rule (ADR) 21, which sets requirements for devices mounted
on the dashboard.
The Tow-Pro
®
Elite remote head can be mounted directly to the dashboard, to the
centre console or through a spare knock-out switch panel and requires only one
hole to be drilled as per the Mounting Guide in Section 2.5. For easy access in an
emergency situation, REDARC recommend installing the remote head within reach
of the driver such as the regions shaded in the diagram below.
2.4 Installation Accessories
REDARC offer a range of vehicle specific switch inserts and
vehicle specific wiring kits designed to make the installation of
the Tow-Pro Elite easier.
The range includes most popular SUV & LCV’s and is frequently
being updated and added to. A full listing of Switch Inserts
and Wiring Kits is available on and can be purchased from the
REDARC website. Please visit
redarcelectronics.com or follow the above QR code
for a direct link to the appropriate page.
2.5 Universal Switch Panel Insert
Refer to “TPSI-001 installation instructions” included with this
kit.