Redarc EBRH-ACCV3-12 Manual Download

Page: 25 / 28

Frequently Asked Questions | 25

Will my trailer brakes work while I am reversing?

The Tow‑Pro

Elite is designed to apply the trailer brakes whether the vehicle is travelling forward

or in reverse. The effectiveness of the brake application in reverse will depend on the mechanical
design of your particular electric brake system.

I have a 2 axle trailer, is the Tow‑Pro

Elite suitable for my trailer?

Yes, the Tow‑Pro

Elite is designed to operate up to 3‑axle trailers.

I lost the knob/nut/bezel, where can I get one?

The knob, nut or bezel can be purchased as spare parts.

Can I connect the Tow‑Pro

Elite through my cigarette lighter socket?

No, as most ‘power sockets’ are rated around 10 A which is insufficient to power trailer brakes and
stop lamps circuits. In addition, these outlets may not be powered continuously.

Summary of Contents for EBRH-ACCV3-12





























Search results

Summary of Contents for EBRH-ACCV3-12

Reviews:

Related manuals for EBRH-ACCV3-12

Brands by name

Popular brands

Redarc EBRH-ACCV3-12, Manual

Search results

Summary of Contents for EBRH-ACCV3-12

Reviews:

Related manuals for EBRH-ACCV3-12

Brands by name

Popular brands