© Red20RC 2014
5
The R630 is not aimed at beginners so it is likely you already have a pretty good
idea of what you are going to use for this build. As a general rule you will need:
Turnigy Talon V2 frame hardware
Motors – 28-32 size, 1100kv or lower
ESCs – SimonK flashed 30A
Props – 9 to 12 inch recommended
Flight controller – Any suitable controller (we’ve used KK2.1.5 and APM so
far)
Radio receiver
FPV camera (micro 21mm size) and transmitter
Battery – 4000 – 5200mah 3S LiPo recommended
HD recording camera to capture your exploits!
Motors:
NTM 2826 1100kv (short shaft version)
ESCs:
MultiStar 30A BEC
with SimonK firmware
Flight Controller:
KK2.1.5
with Steveis 1.14s Pro firmware
Props:
1055 Carbon Fibre
Battery: 4000 –
5200mah 3S LiPo
(max thickness 25mm)
Reciever:
FRSky V8 HV
Flight Camera:
Turnigy IC-120NH Mini CCD Video Camera
Video Transmitter:
ImmersionRC 5.8Ghz Audio/Video Transmitter
with
ImmersionRC 5.8GHz Circular Polarized SpiroNet Antenna V2
HD Camera: GoPro™ Hero 3 Black edition