COPYRIGHT © 2014 RED.COM, INC
REDRAY PLAYER OPERATION GUIDE
955-0017, REV-D | 22
2. Select
Wired (Ethernet - Upper)
.
3. Select
Automatic (DHCP)
.
The REDRAY communicates with the router for about 10 seconds to obtain your network IP address. You
cannot select anything on the REDRAY on-screen display during these 10 seconds.
After the REDRAY obtains the IP address, the panel on the right side of the screen closes and the IP ad-
dress displays on the NETWORK screen.
NOTE:
If the REDRAY is connected to a router through an Ethernet cable and a wireless connection, two (2)
sets of IP addresses display on the NETWORK screen.
CONNECT MANUALLY
If you prefer to use a static IP address (instead of using the DHCP setting), connect to your network by follow-
ing the instructions below:
1. Navigate to
SETTINGS
>
NETWORK
.
2. Select
Wired (Ethernet - Upper)
.
3. Select
Automatic
.
4. Select
Manual
.
5. Select
IP Address
and enter your network information.
6. Select
Subnet Mask
and enter your network information.
Wired (Ethernet - Upper)
Network IP Address