background image

 

 

 

 

 

©2010 RED.COM, INC. 

DECEMBER 28, 2010 

DISCLAIMER 

RED® has made every effort to provide clear and accurate information in these Installation Instructions, 
which is provided solely for the user’s information. While thought to be accurate, the information in this 
document is provided strictly “as is” and RED will not be held responsible for issues arising from typo-

graphical errors or user’s interpretation of the language used herein that is different from that intended by 
RED. All safety and general information is subject to change as a result of changes in local, federal or oth-
er applicable laws. 
RED reserves the right to revise these Installation Instructions and make changes from time to time in the 

content hereof without obligation to notify any person of such revisions or changes. In no event shall RED, 
its employees or authorized agents be liable to you for any damages or losses, direct or indirect, arising 
from the use of any technical or operational information contained in this document. 

COPYRIGHT NOTICE 

© 2010 Red.com, Inc. 

All trademarks, trade names, logos, icons, images, written material, code, and product names used in as-
sociation with the  accompanying product are the copyrights, trademarks or other intellectual property 

owned and controlled exclusively by Red.com, Inc. 

COMPLIANCE 

INDUSTRIAL CANADA EMISSION COMPLIANCE STATEMENTS 

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. 

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequen-

cy energy and, if not installed and used in accordance with the instruction manual, may 

cause harmful interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the interference at his 
own expense. 

CAUTION: If the device is changed or modified, the user may void his or her authority to operate 
the equipment. 

AUSTRALIA AND NEW ZEALAND STATEMENT 

Attention: 

This is a Class A product. In a domestic environment this product may cause radio interference 

in which case the user may be required to take adequate measures. 

Summary of Contents for ONE 1.8 SSD Module













Reviews: