DECEMBER 28, 2010
©2010 RED.COM, INC.
5
REMOVING CF MODULE
1.
Place the RED ONE camera body on its side (connector side down) on the protected surface so that
the CF Module with the word RED facing you.
2.
Using a 2.5mm Allen wrench, remove the four (4) CF Module Allen Screws.
NOTE: When removing the Allen screws from the CF module, be sure to remove the small lock
washers as they may stay in the CF module mounting holes after removing the Allen screws.
IMPORTANT: DO NOT lose the washers as they are to be reused during installation of the RED
ONE 1.8” SSD Module.
Remove Allen
Screws and
Washers
CF Module
