RED EPIC MYSTERIUM-X Operation Manual Download Page 181

Page: 181 / 192

Version 1.6.24 BETA

JULY 25, 2011

179

Insert a T-10 Torx® screwdriver into the back focus adjustment screw. The screw is oriented at

approximately 80° as shown.

Performing Back Focus Adjustment

Carefully and slowly, rotate the back focus adjustment screw to achieve optimum focus.

Turning CLOCKWISE moves the sensor forward.

Turning COUNTER-CLOCKWISE moves the sensor rearward.

NOTE: The center of the image will never be in perfect focus as the lines are less than 1/3 of a

pixel in size.

The back focus adjustment mechanism is self-locking, and does not require a supplementary locking

screw.

This completes the RED EPIC back focus adjustment.

Summary of Contents for EPIC MYSTERIUM-X

































































































































































































Search results

Summary of Contents for EPIC MYSTERIUM-X

Reviews:

Related manuals for EPIC MYSTERIUM-X

Brands by name

Popular brands

RED EPIC MYSTERIUM-X, Operation Manual

Search results

Summary of Contents for EPIC MYSTERIUM-X

Reviews:

Related manuals for EPIC MYSTERIUM-X

Brands by name

Popular brands