RED EPIC MYSTERIUM-X, Operation Manual

Page: 136 / 192

Version 1.6.24 BETA
©2011 RED.COM INC. JULY 25, 2011
134 134
DC IN (POWER INPUT)
The 6-pin LEMO connector accepts a DC voltage b11.5V and +17V DC. Power conditioning
circuits provide protection against reverse-polarity connection, ESD, under voltage, and over current.
Figure 25: View into camera DC IN Power Input connector
Mating Connector: LEMO FGJ.1B.306.CWLD72Z
PIN SIGNAL DESCRIPTION
1
+VBATT Power input, +11.5 to +17VDC
2
3
SCL-BATT Serial Battery Bus Clock
4
GROUND Power Return (Camera Ground)
5
6
SCA-BATT Serial Battery Bus Data
WARNING: It is very important that both pairs of +VBATT and GROUND pins are wired up. DO NOT
fabricate power cables with just one each of +VBATT and GROUND pins wired, as this may cause
damage to the camera’s power supply; this is not covered by Warranty.
NOTE: Two pre-fabricated DC Power input cables are available from RED Digital Cinema.
•
Part No. 790-0138 – DC Power – REDBRICK® to Camera – 18 in. (0.5m)
•
Part No. 790-0164 – DC Power – XLR to Camera – 10 ft. (3m)