21
3-INSTALLATION AND ASSEMBLY
Room ventilation can only be set towards the rear wall if there is adequate insulated ducting of the hot air flow.
The air outlet pipe can become very hot, approx. 200 °C: therefore, it must be adequately insulated with suitable
material, especially points that could come in contact with flammable surfaces or parts that are affected by heat
(e.g. change in shades, wiring ducts, plasterboard, etc.). Moreover, persons and animals must be protected from
accidental or intentional contact. In any case, comply with the regulations and laws in force in the region where the
product is installed.
It is recommended to insulate the entire length of the pipe in order to reduce dispersion and increase heat output
in the room.
1-"5&
4$3&8i"w
'*(,/0##-0$,*/(4$3&8
'*("*3%*3&$5*0/,/0#
Technical Dept. - All rights reserved - Reproduction is prohibited
,/0#
