RED 2820-10-0003, Manual, Page: 20 / 28

20 - en
4 Commissioning
4.1 Before every use
Make sure that the following conditions are met:
Vacuum cleaner, mains cable, suction hose and
accessories are not damaged.
All filters have been inserted and are not
damaged.
4.2 Switching on and off
The plug socket on the vacuum cleaner remains
always under voltage, regardless of the main
switch position.
WARNING!
Danger of injury by automatically starting power
tool!
▷
Switch off power tool or pneumatic tool befo-
re connecting to the vacuum cleaner.
NOTE
With switch in position >0<, the plug socket on
the vacuum cleaner can be used as an extension
cable.
Power consumption: vacuum c
connected power tool (max. 2000 W) max. 16 A.
4.2.2 Switching on the vacuum cleaner
Functions see „3 Display and control elements“
auf Seite 3.
▷
Insert plug into plug socket.
▷
Set switch to position >I<.
↳
Vacuum cleaner starts immediately.
or:
▷
Set switch to position >A< or >RA<.
↳
Vacuum cleaner is in standby mode for
power tools.
4.2.3 Setting the suction hose
diameter*
▷
Set suction hose diameter at the switch.
4.2.3 Setting the suction hose
diameter*
▷
Set suction hose diameter at the switch.
CAUTION
!
Selector switch for minimum air volume flow
signal (horn and light) on vacuum cleaners with
dust classes „M“
In the modes >RA< and >I< the following setting
is made, depending on the diameter of the hose:
Selector switch for
suction hose inner diameter Volume air flow
∅
35 mm
70 l/s
∅
27 mm 41 l/s
∅
21 mm
25 l/s
The speed can be adjusted individually after
setting the hose diameter.
4.2.4 Adjusting the suction power*
▷
Suction power can be adjusted with the secon-
dary air ring on the hose socket if required.
4.2.5 Switching off the vacuum cleaner
▷
Set switch to position >0<.
↳
Vacuum cleaner is switched off.
▷
After switching off, pull the mains plug out.
▷
Roll up mains connection cable.
▷
Store the mains connection cable on the cable
hook.
▷
Store the suction tube by inserting it into the
accessories holder* on the container rear wall.
▷
Put the suction hose ends together so that no
dirt particles leak out.
▷
Remove Power tool.
5 Operating modes
5.1 Sucking up dry materials
▷
Only use a dry filter, vacuum cleaner and ac-
cessories, so that the dust does not stick and
or cake.
▷
When vacuuming soot, cement, plaster or
similar dusts: Insert a PE disposal bag in the
dirt container.
▷
Always use disposal bags in combination with
folded filter cartridges.
NOTE
M class vacuum cleaners should be preferably
used as vacuum cleaners for dry dusts.
* depending on model