Red Sea ReefWave
®
15
adjust the intensities for now and make other changes later. For a full
explanation of wave setting options see “Current Wave Settings” below.
At any time during the setup you can test the unsaved settings currently
on your screen by tapping on the Play button at the top of the
settings page and see the effect it has on your reefscape. You can also
adjust the flow path of the pump by rotating the impellor cages. Each
cage can be set at a different angle. Stopping the preview will return the
pump to the current active wave according to the schedule.
Once you are satisfied with the settings, save your customized wave
with a unique name. It will be stored in your personal Wave Library
and scheduled for 24 hours a day. ReefBeat will now display the
pump Dashboard providing access to all of the advanced settings such
as creating additional customized waves, setting a multi-wave daily
schedule or the time to switch off the pump when the ReefBeat Feed
Mode is activated. All of these settings can be changed at any time as
described below. To go to the ReefBeat homepage without editing, press
the back arrow.
Adding additional ReefWave units
To connect an additional unit, open the Device Manager page from the
Dashboard 3-dot menu and repeat the process as above.
Up to 3 ReefWave units can “Grouped” together and share a common
Schedule and customized waves however the forward and reverse flow
intensities need to be set for each pump individually. ReefWave 25 and
ReefWave 45 can belong to the same group.
After connecting the additional ReefWave to your home network
(note: all units should be connected to the same network) you should
select if the pump is to be grouped with the first pump or set up as an
ungrouped independent unit.
An ungrouped unit will have the same setup process as for the first unit
and will have a unique schedule, wave types and its own card in the
ReefBeat Homepage.
If you have selected to group the pump, open each of the waves in your
schedule and set the forward and reverse intensities for each pump
individually.
The Preview function will activate all of the pumps in the group to see
the combined effect. If you want to test/set the flows for a specific
pump in the group temporarily switch off the other pumps using the OFF
function in the Device Manager.
ReefBeat Homepage
The ReefBeat homepage will show you the current status of all of your
connected devices. Tapping a device or group card links you directly
to the settings Dashboard for each individual device or group. The
homepage also has “Shortcut” buttons for implementing frequent or
important functions across all of the ReefBeat connected devices. The
Shortcut settings page and Device Manager are accessible from the
3-dot menu of the homepage.
