RED ROOSTER TCS-980-AT2S, User Manual

Page: 62 / 72

62
USER MANUAL
▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪ M01-AH13-AT REV2
ACCESSORIES
MAINS EMERGENCY STOP VALVES
ON TCR model hoists the mains valve can either be internal or mounted external to the hoist. As a mains emergency stop valve we
use a range of 3/2 normally closed valves on pendant control hoists. These range from 0.5” to 1.5” depending on the hoist capacity but with the
latest hoists having the valves built into the hoist they are only required on cord conversion to pendant hoists on hoists manufactured
before 2014.
Valve models: 0.5” = VSA 3135-04, 0.75” = VSA3145-06, 1” = VPA 3165-10
UK Ex / ATEX version 0.75” = X773.32.11.1C, 0.75” = VJJ4306/2B, 1” = VJJ4703-2B
PILOT VALVE
These valves are used on TCR hoists where the pendant length is more than 10 metres long. The valves are opened by the control air from the
pendant opening the valve allowing full pressure to open the hoist spool valve.
Valve model: SYJA712-01
DUMP VALVES
On hoists fitted with 1/4” air hose in place of tubes, dump valves are fitted to the control lines to reduce operating delays.
Valve model: DV/0.25
FILTER SILENCING - TYPE AMC
This ensures clean plant air and reduces noise levels.
In areas where you do not want the exhaust air / oil to go freely into the atmosphere we can either pipe the exhaust air away to another room,
fit a filter silencer unit, or a combination of both using the exhaust pipe with a filter silencer on the end of the hose.
The filter removes 99.9% of oil from the exhaust air.
The noise level is also reduced by the silencer and also with the exhaust noise.
Temperature range 5 ° C to 60 ° C.
The exhaust hose and filter should be at least one size larger than the incoming air supply hose.
The exhaust cleaner must be mounted vertically.
If the oil drop level decreases or after a period of 1 year the filter element.