RED ROOSTER TCR-1000-CH, User Manual

Page: 37 / 66

37
USER MANUAL
▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪ M01-AH4-CH REV6
Red Rooster Lifting Limited Nauta House, The Meadows, Oldmeldrum, Inverurie, Aberdeenshire, UK, AB51 0EZ
T: +44 (0) 1651 872101
sales@redroosterlifting.com
REDROOSTERLIFTING.COM
TCR-1000-CH
CROSS HAULING AIR HOIST
C06-AH4-CH REV1
STANDARD FEATURES
• Toku rotary vane motor
• Robust epicycle gearbox
• Failsafe automatic internal disc brake
• Mechanical upper & lower switches
• Cast steel housing
• Internal silencing down to 83 dB(A)
• Alloy safety swivel hooks with safety catch
• Load chain 7 x 21mm of European manufacture to EN818-7
• Automatic load limiter
AVAILABLE OPTIONS
• Cross hauling up to 45˚
• Marine specification
• Special paint systems
• Corrosion protection
• UK Ex scheme or ATEX zone 1 specification
• Chain collectors* (PVC, galvanised or stainless steel)
• Air service units
• Radio control*
• Main air shut off valve
*Please contact us for cross hauling applications.
The TCR-1000-CH is a 1000 kg chain hoist from Red Rooster
Lifting. This is part of our air hoist hook suspension range for lifting
equipment applications in industry.
The Red Rooster Lifting TCR series of air hoists
offers a comprehensive range of lifting equipment
suited to all types of industrial and marine
environments. Red Rooster Lifting hoists are the
perfect lifting solution for where the duty is high, or
where a robust hoist is required to withstand harsh
conditions. The hoists comply with the UK supply
of Machinery (Safety) Regulations 2008 and the
European Machinery Directive. The hoists can be
UKCA marked or CE marked.
This model of air hoist is suitable for ‘Cross Hauling’
working fully loaded at angles of up to 45˚ from
the vertical. It can be used for positioning and
transferring loads with the load chains under
tension between hoists (see Diagram 1). The safety
factor built into the hoist means that the weight
of the load being lifted/transferred will not cause
either hoist to be overloaded during operation.
Where modified for cross hauling at up to 45˚
angle the model number will end with ‘CH’.
UK EX SCHEME ZONE 2
ATEX ZONE 2
AS STANDARD
RAISING EXPECTATIONS