RED ROOSTER TC5-500-LF, User Manual, Page: 20 / 54

20
USER MANUAL
▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪ M01-AH12-LF REV0
SERVICE DATA
Maintenance chart
TCS-500
NO. DESCRIPTION CHECK POINTS STD DIMENSIONS & MAX FOR REPLACEMENT
53
201
Rotor
1st Pinion
w
Replace when wear exceeds 0.2 mm. At this time replace the
102 coupling and 201 first pinion.
55 Vane
STD L = 81mm MIN L = 80.3mm
STD W = 19mm MIN W = 17.5mm
STD T = 4mm MIN T = 3.5mm
Replace if any of the width, length and thickness is less than
the stated minimums.
152 Brake Disc
STD T = 8mm MIN T = 7.3mm
STD W = 2.4mm MIN W = 2.9mm
Below minimum for replacement.
209 Cage Replace when there is a large or uneven play in the pin hole.
201
202
204
205
206
208
1st Pinion
1st Star Gear
1st Link Gear
2nd Pinion
2nd Star Gear
Ring Gear
Replace if there is a step on the surface of the gear teeth.
203
207
1st Pin
2nd Pin
Replace if there is a step on the surface of the pin.
If the pin is replaced, replace the needle bearing and star gear
at the same time.
91 Wheel Replace if loadsheave part is badly damaged or worn.
T
W
L
T
W