Sample S
ettings
Expression Pedals
Plug an expression pedal into the exp jack to control the freq knob. Any expression pedal with a 10k-50k ohm linear pot
will work. For example, the Roland EV-5, Moog EP-3, M-Audio EX-P, or Mission Engineering EP-1. You can also use an
Electro-Harmonix 8-Step Program to sequence the sampling rate. For control voltages, 0-3.3V on the tip is the correct
range, but so you can send +5V and use the freq knob to bring it down to 3.3V. The bitmap has current limiting in case
you use a TS cable, but it is best to use a 1/4” TRS cable with the ring unconnected. The Expert Sleepers “floating ring”
cable is an easy way to do that. We also sell suitable cables at store.redpandalab.com.
When an expression pedal is used, the freq knob sets the maximum value. If your expression pedal has a minimum value
knob, you can control the knob over a specific range of values.
Warranty
This product is warranted against defects in materials or workmanship for one (1) year from date of original purchase. It
does not cover damages or wear resulting from accident, misuse, abuse, or unauthorized adjustment and/or repair.
Should this product require service (or replacement at our option) while under warranty, please contact info@redpanda-
lab.com.
Sample Rate
When a signal is sampled at too low a rate, upper
harmonics fold back to lower frequencies.
Bit Depth
Bit reduction reduces the number of allowed signal
levels. The smoothness of the output signal is related to
both the input signal level and the number of bits.
Harmonics
Sound: 8-bit Sampler
Sound: Overtones
Sound: Octave Fuzz
Sound: Square Wave Fuzz
Use neck pickup, treble rolled back, volume 20%
Sound: Random Modulation
Sound: Video Game Bass
