background image

18

Using MIDI

Your pedal supports USB MIDI (in/out) and 1/4" TRS MIDI (input only).

USB MIDI

Your pedal is a class-compliant USB device, which allows you to:
•  Control all parameters
•  Access additional hidden parameters

The pedal can work with any USB MIDI host, including:
•  Macintosh and Windows computers.  The pedal shows up as a MIDI device and is available to all pro-

grams.

•  Apple iPad, iPod touch, and iPhone using the Lightning to USB 3 Camera Adapter.
•  Standalone USB MIDI hosts allow you to connect the Tensor to hardware with 5-pin DIN MIDI connec-

tors without the use of a computer.  Examples include: 
iConnectivity iConne 
iConnectivity mio4 
Disaster Area Designs Gen3 MIDI controllers with their gHOST option 
Kenton MIDI USB Host MkII 
MidiPlus USB MIDI Host 
See our 

Knowledge Base

 for up-to-date information

 
The pedal sends and receives on MIDI channel 1 by default.  You can change the MIDI channel using MIDI  
System Exclusive messages or our web-based editor.  The MIDI channel is remembered when power is 
off.  See "System Exclusive (SysEx)" on page 24 for more information.

TRS MIDI Input

See "Control Input" on page 15 for information about configuring TRS MIDI.  Only MIDI input is support-
ed, so you can use the web editor to change parameters and configuration settings, but it will not show 
the current state of the pedal.

Summary of Contents for BITMAP 2































Reviews: