R
EVISED
2017-09-11
H
ARDWARE
I
NSTALLATION
D
RAWING
N
O
. LP0987-D
USB I
NTERFACE
2-100
N-Tron
®
Series NT24k
®
Compact Hardware Manual
2.9
USB
Interface
The NT24k switches provide a USB interface accessed via the USB connector labeled as “USB” on the top of the
compact models. The USB connection is used to access the Command Line Interpreter (CLI) or PPP (Point-to-
Point Protocol).
USB
Cable
Connect the USB port of your PC and the Switch using a standard USB cable. A cable with a Type A connector for
the PC end, and a Type B connector for the switch end must be used. For NT24k-16M12 models, a cable with a
Type A connector for the PC end, and an M12 Mini-B USB connector for the switch end must be used.
Standard USB cables are readily available from a variety of computer stores.