MODES OF OPERATION FOR DUAL PRESET LNXNT TIMER (Cont’d)
MODE 1 TIMED OUTPUTS AT PRESET, MANUAL RESET TO ZERO
The unit times from zero, when preset 1 is reached,
output 1 turns on. When preset 2 is reached, output 2
turns on. Time continues to accumulate after the
preset levels have been reached. The outputs turn off after their
respective programmed time values. When a manual reset is
performed, the time resets to zero and the cycle starts again.
MODE 2 OUTPUT 1 TURN OFF AT PRESET 2, LATCH OUTPUT 2
AT PRESET 2, MANUAL RESET TO ZERO
The unit times from zero, when preset 1 is reached,
output 1 turns on. When preset 2 is reached, output 1
turns off, and output 2 turns on. Time continues to
accumulate after the preset levels have been reached.
Output 2 remains on until a manual reset occurs. Manual reset turns
off both outputs, the time resets to zero, and the cycle starts again.
MODE 3 OUTPUT 1 TURN OFF AT PRESET 2, TIMED OUTPUT 2
AT PRESET 2, MANUAL RESET TO ZERO
The unit times from zero, when preset 1 is reached,
output 1 turns on. When preset 2 is reached, output 1
turns off and output 2 turns on for the amount of time
programmed. Time continues to accumulate after the preset levels
have been reached. When a manual reset is performed, the time resets
to zero, and the cycle starts again.
MODE 4 OUTPUT 1 TURN OFF AT PRESET 2, TIMED OUTPUT 2
AT PRESET 2, AUTOMATIC RESET TO ZERO AT PRESET
2
The unit times from zero, when preset 1 is reached,
output 1 turns on. When preset 2 is reached, output 2
turns on for the amount of time programmed. At the
beginning of timed output 2, output 1 turns off, the time automatically
resets to zero, and the cycle starts again.
MODE 5 TIMED OUTPUTS AT PRESETS, AUTOMATIC RESET TO
ZERO AT PRESET 2
The unit times from zero, when preset 1 is reached,
output 1 turns on. When preset 2 is reached, output 2
turns on. The outputs turn off at the end of their
respective programmed time values. At preset 2, the time
automatically resets to zero and starts the cycle again.
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
