red lion Astro Line Series, Instruction Manual

Page: 6 / 63

PROGRAMMING THE PRESETS, SCALE FACTORS &
TIMED OUTPUT VALUES [Cont’d]
Note: A Timed Output Value of zero cannot be programmed into the Gemini
5200. If a value of 0 is entered into the display, and the “E” key is pressed, the
unit will remain in data entry mode. If a new value is not entered, it will time
out and the unit will continue to use its previous setting.
As with the other functions, you must press “E” to record the changes. For the
data entry modes, if you do not press the “E” key, a time out of 5 seconds occurs,
and the display returns to operating mode without any changes to the value. The
only time any change will occur is when the “E” key is pressed.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com