
3-18
N-Tron® Series 300 TX/FX Models User Guide
Operation and Maintenance
Revised 2015-12-04
300
TX/FX
Models
LED’s
and
Operating
Modes
The 300 TX/FX models LED’s and a description of the associated operating mode is presented in
Table 10.
LED
Color
Description
Green
Power is applied
OFF
Power is off
Green
100Mb Link between ports established
Orange
10Mb Link between ports established
OFF
No link between ports
Green
Data is active between ports and operating
in full duplex
Orange
Data is active between ports and operating
in half duplex
OFF
Data is inactive between ports
Unit
LED’s
Software
Configuration
Command
Line
Interpreter
(CLI)
You can configure and/or query all the important parameters of an N-Tron® series 308FX2/309/316/317 Industrial
Ethernet switch using a Command Line Interpreter (CLI). These functions are accessible using the serial port
(marked COM).
To access the CLI
1.
Connect a PC serial port to the 308FX2/309/316/317 V24 serial port and use HyperTerminal or equivalent.
2.
Set COM Parameters to: 9600, 8, none, 1, none
3.
After a successful connection and reboot, the boot menu should display:
4.
The displayed information includes the model number, firmware version, and MAC address.
5.
Also, information is presented as to which functions are enabled, for example in this case above:
-
N-View
™
is reported as enabled (default).
LNK
ACT
Summary of Contents for 308FX2
Page 1: ...N Tron Series 308FX2 309FX 316TX 317FX Industrial Ethernet Switches User Guide December 2015 ...
Page 12: ...Preface Revised 2015 12 04 x N Tron Series 300 TX FX Models User Guide ...
Page 40: ...3 28 N Tron Series 300 TX FX Models User Guide Operation and Maintenance Revised 2015 12 04 ...