red lion 308FX2, User Manual

Page: 23 / 40

N-Tron® Series 300 TX/FX Models User Guide 2-11
Installation Revised 2015-12-04
DIN ‐ Rail Mounting ‐ 308FX2 and 309FX
Install the unit on a standard 35mm DIN-Rail. Recess the 308FX2/309FX unit to allow at least 5” of horizontal clear-
ance for fiber optic cable bend radius.
Vertical Mounting
1. To mount the unit vertically to the 35mm DIN-Rail, place the top edge
of the bracket on the back of the unit against the DIN-Rail's top edge
at an upward angle.
2. Rotate the unit downward and back against the DIN-Rail until it snaps
into place.
Remove Vertical Mounted Unit
1. To remove the vertically mounted unit from 35mm DIN-Rail, carefully
apply downward pressure on the unit.
2. Rotate the unit upward and away from the 35mm DIN-Rail and lift up
for removal.
Horizontal Mounting
1. To mount the unit horizontally to the 35mm DIN-Rail, place the bottom
edge of the bracket on the back of the unit against the DIN-Rail's bot-
tom edge at a downward angle.
2. Rotate the unit upward and back against the DIN-Rail until it snaps
into place.
Remove Horizontal Mounted Unit
1. To remove the horizontally mounted unit from 35mm DIN-Rail, care-
fully apply upward pressure on the unit.
2. Rotate the unit downward and away from the 35mm DIN-Rail and
lower it for removal.